รายละเอียดสินค้า
CHMLAB offers a wide range of Glass microfiber filters made of 100% borosilicate glass fibers. The depth structure of the filter with its large surface area provides an outstanding impurity retention capacity combined with a low filter resistance.
Glass fiber filters adsorb the finest particles down to 1 µm from liquids and < 1 µm in air and gases (even aerosols with this particle diameter are separated), as the electrostatic interaction between the glass fibers and gases is better than between glass fibers and liquids.
Temperature resistant up to 500ºC (with organic binders up to 180ºC)
GF1 GRADE – (1.6 µm)
Particularly suited to atmospheric pollution controls, intake controls and ozone level measurements.
This product is used in testing for algae in water, in general water controls and in waste water analysis.
Its use for filtering solvents in high-resolution laboratories is recommended. The Trace Element Levels were obtained with an AAS (Atomic Absorption Spectrometer) with 100% dissolved fiberglass.
GF2 GRADE – (1.0 µm)
It is mainly used in membrane pre-filtration.
The Trace Element Levels were obtained with an AAS (Atomic Absorption Spectrometer) with 100% dissolved fiberglass.
GF3 GRADE – (1.2 µm)
This is the most suitable filter for testing for solids in suspension in water, in accordance with the parameters set by the EN European regulations. In general is suitable for any work in water control and drinking or waste water analysis, including clarification processes.
In biochemical tests, it is very useful for analysing carbohydrates, cellular cultures, etc.
The Trace Element Levels were obtained with an AAS (Atomic Absorption Spectrometer) with 100% dissolved fiberglass.
GF4 GRADE – (2.7 µm)
The most widespread use of this is in membrane pre-filtering.
Its high particle retention ensures that the sample is properly clarified before passing through surface filters (membrane filters).
The Trace Element Levels were obtained with an AAS (Atomic Absorption Spectrometer) with 100% dissolved fiberglass.
GF5 GRADE – (0.7 µm)
This is the filter with the highest retention performance of the range.It is particularly suited for filtering samples and solvents for HPLC, being this pre-filtration most important for ensuring the success of the test.
It is also suitable for biochemical test, such as clarifications, protein filtrations, cellular cultures, etc.
The Trace Element Levels were obtained with an AAS (Atomic Absorption Spectrometer) with 100% dissolved fiberglass.
GF6 GRADE – (1.5 µm)
Suitable for atmospheric pollution control, particularly in testing for air intake levels. It is also appropriate for waste water control, testing for solids in suspension, dissolved solids and volatile matter in accordance with the parameters set by the American Standard Methods.
It is also suitable for cellular cultures.
The Trace Element Levels were obtained with an AAS (Atomic Absorption Spectrometer) with 100% dissolved fiberglass.
ผลิตภัณฑ์แนะนำ
จำหน่ายอุปกรณ์ และวัสดุวิทยาศาสตร์ , วิทยาศาสตร์การแพทย์ สำหรับใช้ในห้องปฏิบัติการ งานวิจัย, โรงพยาบาล , มหาวิทยาลัย , สถานศึกษา , สถาบันวิจัยวิทยาศาสตร์ และโรงงานอุตสาหกรรม
ห้างหุ้นส่วนจำกัด ที.ซี.สถาพร กรุ๊ป
64 ซอยเอกชัย 80/2 ถนนเอกชัย แขวงบางบอน เขตบางบอน กรุงเทพฯ 10150
02-894-4891-5 , 089-812-2755
02-894-4890
admin@tcsathaporn.com
tcs.jdn@gmail.com
จันทร์ - ศุกร์ เวลา 8.30 น.ถึง 17.30 น.
เสาร์ - อาทิตย์ (หยุด)
จำนวนผู้เข้าชม : 3,268,768
